PdNi/Ni Nanotubes Assembled by Mesoporous Nanoparticles for Efficient Alkaline Ethanol Oxidation Reaction

The optimization of structure and composition is essential to improve the performance of catalysts. Herein, mesoporous nanoparticles assembled PdNi/Ni nanotubes (mPdNi/Ni NTs) are successfully fabricated using nickel nanowires as sacrificial template. The combination of nanotubular structure with mesoporous nanoparticle morphology can provide facilitated transfer channels and sufficient active sites, allowing the full contact and reaction between catalysts and reactants. Therefore, the synthesized mPdNi/Ni NTs exhibite superior ethanol oxidation performance to mesoporous Pd nanotubes and commercial Pd black. This study proposes a rational strategy for the development of nanoparticle assembled nanotubes with surface mesoporous morphology, which can greatly improve catalytic performance in various electrocatalytic fields.     

Vinyl polymerizations of norbornene catalyzed by nickel complexes with acetoacetamide ligands

On the basis of a remote effect, a series of acetoacetamide ligands and corresponding nickel complexes N‐(R‐phenyl) acetoacetamide Ni(CH₂Ph) (PMe₃) (R = H, 1 ; R = 2‐methyl, 2 ; R = 2,6‐dimethyl, 3 ; R = 2,6‐diisopropyl, 4 ; R = 4‐NO₂, 5 ) were synthesized and characterized. The solid structure of complex 3 was confirmed by X‐ray single‐crystal analysis to be of cis form. ¹H and ³¹P NMR spectroscopy confirmed that cis and trans isomers of nickel complexes were present in solution. Norbornene polymerizations with acetoacetamide nickel complexes activated with modified methylaluminoxane (MMAO) were investigated in detail. Remote steric and electronic effects of acetoacetamide ligand on catalytic activity and molecular weight of polynorbornenes (PNBs) were observed. Characterizations of the obtained PNBs show that the obtained polymer products are non‐crystalline vinylic‐addition polynorbornenes. Copyright © 2013 John Wiley & Sons, Ltd.     

Pharmacokinetic study of tanshinol and ligustrazine in rat plasma after intravenous administration of tanshinol and Danshen Chuanxiongqin Injection

To investigate the effect of ligustrazine on the pharmacokinetic profile of tanshinol after intravenous administration in rats, a sensitive liquid chromatography tandem mass spectrometry method was developed and validated for quantitative determination of tanshinol and ligustrazine in rat plasma. After prepared by protein precipitation, the analytes were separated on a Waters Acquity HSS T3 column (100 × 2.1 mm, 1.8μm) and eluted by 0.1% formic acid in water and acetonitrile at a flow rate of 0.4 ml/min. The precursor–product ion transitions were m/z 197.0 → 135.0 for tanshinol, m/z 417.1 → 255.1 for liquiritin (internal standard) in negative ion mode and m/z 137.1 → 55.0 for ligustrazine in positive ion mode. To avoid the interference of tanshinol metabolite transformation, the stability of analytes in samples collected after administration was assessed. The validated method was successfully applied to a pharmacokinetic study after intravenous administration of single tanshinol and Danshen Chuanxiongqin Injection. After Danshen Chuanxiongqin injection administration, the values of elimination half-time, area under the concentration–time curve and C_o were 0.36 ± 0.13 h, 1.29 ± 0.37 μg/ml h and 10.51 ± 2.58 μg/ml for male rats, respectively. In the single tanshinol group, the corresponding values were 0.56 ± 0.24 h, 1.85 ± 0.44 μg/ml h and 14.11 ± 2.26 μg/ml for male rats—30–40% higher than those for the Danshen Chuanxiongqin Injection group. There was a significant different between male and female rats. This study provided information on the influence of ligustrazine on the pharmacokinetic characteristics of tanshinol after intravenous administration of Danshen Chuanxiongqin Injection in rats, which will be helpful for its clinical application.     

新型蒽类聚方酸菁的合成及其性能

以蒽为起始原料,经溴代反应和Witting-Horner反应制得单体9,10-双[2-(1-辛基-1H-吡咯-2-基)乙烯基]蒽(3);3与芳酸缩聚合成了一个新型的蒽类聚方酸菁(4),其结构和性能经UV-Vis,1HNMR,13CNMR,IR,XRD,SEM和TG表征。4在氯仿中的λmax位于700nm;4为非晶态结构;4的初始分解温度为297.1℃。     

An experimental study on seepage behavior of sandstone material with different gas pressures

The seepage evolution characteristic of brittle rock materials is very significant for the stability and safety of rock engineering. In this research, a series of conventional triaxial compression and gas seepage tests were carried out on sandstone specimens with a rock mechanics servo-controlled testing system. Based on the experimental results, the relationship between permeability and deformation is firstly analyzed in detail. The results show that the permeability–axial strain curve can be divided into the following five phases: the phase of micro-defects closure, the phase of linear elastic deformation, the phase of nonlinear deformation, the phase of post-peak stress softening and the phase of residual strength. The seepage evolution characteristic is also closely correlated with the volumetric deformation according to the relationship between permeability and volumetric strain. It is found that the gas seepage pressure has a great effect on the permeability evolution, i.e. permeability coefficients increase with increasing gas seepage pressures. Finally, the influence of gas seepage pressures on the failure behavior of brittle sandstone specimens is discussed.     

Low temperature synthesis of titanium diboride nanosheets by molten salt–assisted borothermal reduction of TiO2

Journal of Nanoparticle Research - In this work, impact of synthesized silica nanotubes (SNTs) on morphology and performance of polyvinylidene fluoride (PVDF) nanocomposite membrane was studied....     

Removal of oxygen from silicon by electron beam melting

Small amounts of multicrystalline silicon were melted in an electron beam furnace in different experimental conditions in order to investigate the oxygen evaporation behavior during the electron beam melting (EBM) process. The oxygen content level before and after EBM was determined by secondary ion mass spectroscopy. The oxygen content was reduced from 6.177 to 1.629 ppmw when silicon was melted completely at 15 kW with removal efficiency up to 73.6 %. After that, it decreased continually to <0.0517 ppmw when the refining time exceeded 600 s with a removal efficiency of more than 99.08 %. During the melting process, the evaporation rate of silicon is 1.10 × 10^?5 kg/s. The loss of silicon could be reduced up to 1.7 % during oxygen removal process to a desirable figure, indicating EBM is an effective method to remove oxygen from silicon and decrease the loss of silicon.